Thermo Scientific Orion 960 Titrator Addendum For the stability handling during the electrode calibration in the autosampler mode, electrode potentials will be read based on the following criteria: 1. Stir for 10 seconds. 2. The 960 uses stability calculation based on the current 960 algorithm.
3. thermo orion model 960 titrator plus Intended for use in laboratories where automation is needed to overcome problems of sample throughput or analytical complexity. Can automate the ion or pH measurement of any species measurable by electrode. Preprogrammed analysis techniques: preset pH endpoint, preset mV endpoint, first derivative titration, second derivative titration singledoublemultiple known subtraction, multiple analate addition, gran function, gran predict, Thermo Scientific Orion 960 Titrator Addendum Page 11 Thermo Fisher Scientific Environmental Instruments Water Analysis Instruments 166 Cummings Center Beverly, MA USA Tel: Toll Free: Dom.
Fax: Intl. 960 Titrator PLUS System, complete with EA 940 pHISE meter, Orion 960 Titrator Plus Module. Includes: Base assembly, tower assembly, electrode holder, stirrer, two dispenser probes, antidiffusion dispenser probe with six tips, tubing kit, calibration kit, cable (Orion 960 and EA 940), reference tablet, two working solution bottles, two dip determined by the titration to another appropriate unit of measurement.
Sample Requirements Expected sample concentration should be within the range of 1 x 102 to 1 x 105 M. Higher concentrations may be diluted. The sample volume or weight used should give an endpoint volume between 1 to 5 mL when titrated using the 960 titrator.
The Orion 960 potentiometric titrator can be used for classical titrations and it can also automate the measurement of any species measurable by ion selective and pH electrodes. Operation is simple by answering" YES" and" NO" to the easytounderstand questions on the instrument's display.
Orion 960 Titrator PLUS System, complete with Orion EA 940 pHISE Meter and Orion 960 Titrator Plus Module, includes: Base assembly, tower assembly, electrode holder, stirrer, two dispenser probes, antidiffusion dispenser probe with six tips, tubing kit, calibration kit, cable (Orion 960 and EA 940), reference tablet, two working solution