Home

Model 35 viscometer instruction manual

BROOKFIELD DIAL VISCOMETER Operating Instructions Manual No. M P700 Operating Instruction Manual 7) Factor Finder Please check to be sure that you have received all components, and that there is no damage. appropriate to the viscometer modelspindlespeed combination being used. Refer to the table Search among more than user manuals and view them online in. pdf Fann Model 35 viscometers are used in research and production. such as a drilling fluid is described in Section 7.

a plot of shear stress vs. Model 35 Viscometer Instruction Manual 1 Introduction Fann Model 35 viscometers are directreading instruments which are available in six. bob B1. 1 Background Fann Model 35 viscometers are Couette Instruction manuals and guides for Fann products can be found using this list. Industrial Drilling Products Fann Instruments are ready for Model 34 Viscometer Instruction Manual Part No. EA Rev. E. For more information, The Model 34A viscometer operates at 300 rpm and 600 rpm and the speeds must be changed while the viscometer Eight torsion springs are available for the FANN 34 and FANN 35 series Viscometer.

The F0. 2 and F0. 5 are Model 35 viscometer instruction manual 2 Fig. 1 Model 35 Viscometer 3 SECTION 2 SAFETY CONSIDERATIONS A. SAFE OPERATION The safe operation of the FANN Model 35 Series Viscometer requires that the laboratory technician be familiar with the proper operating procedures and potential hazards associated with the instrument.

Model 35 Viscometer Instruction Manual The Fann Model 35 Viscometer is widely known as the Standard of the Industry for drilling fluid viscosity measurements.

The Model 35 Viscometer is a versatile instrument for research or production use. Model 35 Viscometer Instruction Manual Revision P, January 2016 10 3 Features and Specifications The Fann directindicating viscometers are equipped with the standard R1 rotor sleeve, B1 bob, F1 torsion spring, and 2 SECTION 1 DESCRIPTION The FANN Model 35 viscometer are direct reading instruments which are available in six speed and 12 speed designs for use on either 50 Hz or 60 Hz electrical power.

The standard power source is 115 volts but all of the models may be fitted with a transformer which makes operation with volts dpdt onoff model 35 65 a boot switch model 35 viscometer 66 a cup sample fmodel 35 viscometer 350ml 67 n instruction manual for model 35 viscometer 68 a warranty card 69 a bag plastic nonlock 12in.

Model 35 Viscometer Instruct ion Manual Revision N, February 2013 5 1 Introduction Fann Model 35 viscometers are directreading instruments which are available in six speed and twelve speed designs for use on either 50 Hz or 60 Hz electrical Model 35 Viscometer Instruction Manual. The OFITE Model 800 Viscometer determines the flow characteristics of oils and drilling fluids in terms of shear rate and shear stress over various time and temperature ranges at atmospheric pressure.